The ACF-25-FF is a thermally and acoustically insulated duct equipped with a female galvanized duct connector on both ends.
Application
The ACF-25-FF flexible ducts are used in ventilation, air conditioning, and air handling systems where high mechanical strength, temperature, fire-resistance, and thermal and sound attenuating qualities are required
Composition
Micro-perforated heavy multiple layered corrugated innerduct
aluminium/polyester outer jacket, reinforced with fibreglass
Glass wool insulation of thickness 25 mm
Fire safety: Innerduct according DIN4102 and European EN13501-1 classified as A1, Outer ducting according to EN13501-1 classifies B - s1, d0
Colour: Aluminium
Galvanized female duct connection on both sides of the flexible duct
Specification
Temperature range: From -30°C till +140°C
Recommended air velocity (max): 10 m/s
Operating over pressure (max): + 2000 Pa
Pressure loss: see diagram
Diameter range: 80 mm - 250 mm (315 on request)
Chemical resistance
Good resistance to many organic solvents
Moderate resistance to acid and base
Not be be used for discharge of combustion gases from open fire places or oil-fired boilers
Static properties
The ACF-25-FF is suitable for applications where static discharges have to be avoided
Accessories
As the ACF-25-FF has 2 female connections, a male connection can easily be obtained by adding a male duct connection MGM to one or both sides
Other available products
Non-woven version available on request
Order example
ACF-25-FF, 250, 1000
Explanation :
ACF-25-FF = Type of Flexible duct
250 = Diameter of duct connection
1000 = Length of flexible duct
Text for tender
The connection of the plenum boxes shall be done with the use of acoustically and thermally insulated flexible ducts. Innerducting according to DIN4102 and European norm EN13501-1 Classified as A1. The outer jacket according to EN 13501 and classified Bs1. The duct will be equipped with a female duct connection on both ends of the flexible part
Brand ATC Type ACF-25-FF
The connection of the plenum boxes shall be done with the use of acoustically and thermally insulated flexible ducts. Innerducting according to DIN4102 and European norm EN13501-1 Classified as A1. The outer jacket according to EN 13501 and classified Bs1. The duct will be equipped with a female duct connection on both ends of the flexible part
Brand ATC Type ACF-25-FF
Pressure loss graph
Sound attenuation for 1m duct - Tolerance +/- 2 dB