PRODUCTS
EShop-number
Password
Welcome to CAIROX BELGIUM

PHCS • Pan head concrete screw with Torx T30 connection

  • Screws and threaded rods
  • T30 connection

Concrete screw with pan head and Torx T30 connection.
Especially designed for fixing 41x41 mounting profiles in different concrete types (see applications), to guarantee the free movement of the sliding nuts.
To be fixed together with the bodywork washers WAS MR30 M8.

Brand

Sufix

Application

  • Cracked concrete C20/25 - C50/60
  • Non-cracked concrete C20/25 - C50/60
  • Reinforced concrete

Specifications

  • Zinc-coated steel
  • Steel strength class: 12.9

Composition

  • Nominal tensile strength 1200Nmm²
  • Yield strength 1080Nmm²
  • Tensile strength in case of fire R30 = 0.28kN / R60 = 0.25kN / R90 = 0.20kN / R120 = 0.14kN

Accessories

  • Mounting profiles MR GT 41x41
  • Body washers WAS MR30 M8
  • Torx bit BIT PHCS

Text for tender

Copy
Self-tapping concrete screw with steel strength 12.9 that can be fixed directly into the concrete without other accessories such as plugs. The total load kan be determined in functioin of the quality of the concrete and the anchorage depth and is always between 9kN and 10.71kN. According to EN & DIN standards, this screw has a fire resistance of R30 0.28kN – R60 0.25kN – R90 0.20kN – R120 0.14kN.

1. Drill a hole with a 6mm drill bit to the indicated depth.
2. Make sure the hole is free of dust and dirt.
3. Place the profile and the body washer in front of the hole.
4. Tighten the screw with an impact driver.
5. Tighten to recommended torque.
6. The screw can be reused several times.

Mounting instructions

Technical data / Selection table

Installation ParametersPHCS06L40T30
Nominal drill bit diameterd0mm6
Cutting diameter of drill bitdcut≤mm6.4
Depth of drill hole*h0≥mm45
Nominal embedment depthhnommm35
Effective embedment depthhefmm24.7
Maximum installation torqueTimp.maxNm400
Minimum edge distanceCminmm50
Minimum spacingSminmm100
Minimum distance between anchor groupsAminmm100
*Real depth of drill hole h0 = L +10 - tfix
HELPCopyrightSales conditionsCookie policyfujitsu-airco.be

Requesting information. Please wait a moment...