ERI-BD(S)G • Insulation in synthetic rubber for bends

Customized insulation for galva bends consisting of ERI elastomeric synthetic foam with closed cell structure.

• ERI-BD(S)G are custom cut and glued insulation sleeves for easy and quick insulation of galva bends in 45° and 90°. ERI synthetic rubber insulation is suitable for preventing condensation and reducing heat losses. The ERI-BD(S)G sleeves should be used in combination with the BDG and BDSG bends in galvanized steel.

• Black

• Synthetic rubber with closed cell structure

• Thermal conductivity
  • 0,034 W/mK at -10°C
  • 0,035 W/mK at 0°C
  • 0,037 W/mK at 10°C
• Water vapour diffusion resistance µ≥10000 according to EN12086 and EN13469
• Operating temperature from -50 up to 85°C
• Excellent flexibility
• Fungus and bacterial resistant
• Corrosion risk DIN 1988, pH Neutral=7 EN13468
• Does not contain CFC, HCFC or asbestos
• Good resistance to mineral and vegetable oils, benzene/ petroleum ether, ordinary diluted acids and bases.
  
• Fire resistance Euroclass B,s3,d0 EN13501-1 / EN13823
• Surface sound absorption up to 27dB(A)

• To be pulled over a bend BDG or BDSG
• To be gluede togheter with ERI insulation
• The seam needs to be finished with ERI TAPE
• For protection against UV rays, when used outdoors, ERI must be painted or covered with a UV resistant protection within three days of application.
  

• ERI CLEANER: surface cleaner
• POWER SPRAY: contact glue in spray
• ERI GLUE KIT: contact glue
• ERI TAPE: self-adhesive tape with closed cells

• The thermal and acoustic insulation of the ducts is achieved with insulation in synthetic rubber with a closed cell structure. ERI-BD(S)G are custom-cut and glued insulation sleeves for easy and quick insulation of galva bends in 45° and 90°.

ERI (Aerofoam NBR) flexible insulation material is an elastomeric plastic foam, whose closed cell structure offers high thermal efficiency. It prevents condensation and also has favorable acoustic properties. ERI (Aerofoam NBR) is self-extinguishing, not flame-conductive and does not drip. The mechanically strong foam structure and stability reduces the risk of damage and thus prevents costly repair work. The antimicrobial composition in combination with the smooth skin ensures a dust and fiber free and easy to clean insulation system. This makes ERI (Aerofoam NBR) particularly suitable for use in industrial, commercial and utility buildings. The seam must be finished with ERI TAPE. For protection against UV radiation, ERI should be painted or covered with UV-resistant protection within three days of application when used outdoors.

Benefits and features:

• Guaranteed and optimal thermal properties
• Vapor tight and suitable for cold insulation
• High flexibility
• Extremely strong
• Excellent workability
• Fire resistance: B,s3,d0 EN13501-1 (self-extinguishing, not dripping, not flame-conductive)
• Thermal conductivity: 0,035 W/mK at 0°C

• CAIROX type ERI - Insulation on a roll
• CAIROX type ERI-BD(S)G - Preformed insulation for bends

• ERI-BDG, 10 mm, Ø160

Explanation

ERI-BDG = Type of insulation for bend BDG

10 mm = Insulation thickness

Ø160 = Diameter of bend

• Other insulation thicknesses and custom products available on request.