CVR • Electrical heating battery for Renovent

• The CVR-VM is used for preheating to prevent the heat exchanger from freezing. This way, the unit will not start the defrost mode. This battery can only be used for Renovent HR.

• The CVR-VS is used for preheating to prevent the heat exchanger from freezing. This way, the unit will not start the defrost mode. This battery can only be used for Renovent HR with an optional print or for Renovent Sky 300 or Sky 150 Plus.

• The CVR-NM is used for post-heating of the air that is pulsed into the rooms up to a certain temperature that is set on the unit. This battery can only be used for Renovent HR with optional print.

• The CVR-NS is used for post-heating of the air that is pulsed into the rooms up to a certain temperature that is set on the unit. This battery can only be used for Renovent Sky Plus.

• The CVR-NE is used for post-heating of the air that is pulsed into the rooms up to a certain temperature that is set on the unit. This battery can only be used for Renovent Excellent Plus.

• Heating element 1000W

• Separate power supply to be provided 230V – 50 Hz

• Insulated on the outside

• Protection against overheating with manual reset
• Post-heating batterie are provided with temperature sensor

• The parameters will have to be adapted when mounted - please refer to the installation instructions

CVR – NE 400 1000W

Explanation

CVR = Circular electrical battery

N = Post-heating

E = Excellent

400 = max air flow Renovent