This HRC70 40 ZéPAC is an air/water heat pump that is suitable for heating and cooling. The water can be heated to high temperatures. The monoblock unit is filled with natural refrigerant propane (R290) and easily reaches water temperatures up to 70°C. The device guarantees proper operation at outside temperatures down to -20°C.
The HRC70 40 ZéPAC is a heating/cooling unit that uses 2 scroll compressors of equal capacity, which are equipped with soft starters as standard. This ensures 2 power stages and low power consumption. Due to the specific construction, the device will switch to defrost mode less often and the defrost cycle will be completed as efficiently as possible.
The unit maintains its high COP values even at negative outside temperatures. Possibility to cascade 2 HRC70 40 Zépac heating/cooling devices with a total power of 80 kW.
Monoblock heat pump (outdoor unit) HRC70 40 kW with :
- Flexible pipes (Durite) of 5 m long and rigid insulated pipe to
indoor module (diameter according to distance between the two, see table at the
bottom of this page).
- Filter 1"1/4 already installed in the return duct of the heat pump.
- Primary pump already installed in the heat pump.
- 2,5 bar pressure relief valve mounted in the heat pump.
Indoor module ZéPAC Uni-module 1x Pilote:
- Buffertank/hydraulic découpling bottle 78L with air vent and release valve
- 50 m long bus cable for communication between the HRC70 and the ZéPAC (do not place in parallel with power cable).
- Pressure sensor
- 6 bar safety valve
- Flow meter
- Electronic CAREL regulation
- USB stick (comes with manual)
- 4 x Shut-off valve on the left-side
- Sludge valve