PRODUCTEN

EShop-nummer

Wachtwoord

Welcome to CAIROX BELGIUM

Pricelist request Request e-shop access Professional info Promotions

HRC70 080/120/160 Z2 CASCADE • Cascade high temperature air/water heat pumps 70°C

Intuis - Auer
Air/water monoblock
Hydromodule
R290
80 - 160 kW

Datasheet Manual / User manual all the PILOTS Technical data / Heating capacity HRC70 80 Air from -20°C to 20°C water 35 to 65°C

HRC⁷⁰ 40 and HRC⁷⁰ 80 air/water heat pumps in cascade are suitable for high water temperatures. The monoblock unit is filled with the natural refrigerant propane (R290) and easily reaches water temperatures up to 70°C. The devices guarantee proper operation at outside tempartures down to -20°C.

The HRC⁷⁰ 40 and HRC⁷⁰ 80 are a heating only unit that use 2 scroll compressors of the same capacity and with a soft starter as standard. This ensures 2 power stages and low power consumption. Due to the specific construction, the device will switch to defrost mode less and the defrost cycle will be completed as efficiently as possible.

The unit maintains its high COP values even at negative outside temperatures. Possibility to cascade 3 HRC⁷⁰ 40units with a total power of 120kW or 2 HRC⁷⁰ 80 units with a total power of 160kW.

Brand

Auer - Intuis

Application

Production of domestic hot water
Floor heating
Fan coils
Radiators

Appropriate for:

Production of domestic hot water for showers in fitness centers, factories, sporting facilities,...
Heating of halls and large rooms
Retail, public buildings, offices,...

Composition

Outdoor: Two or three monoblock heat pumps HRC⁷⁰ 40 or HRC⁷⁰ 80 for cascade installation.

Included with each outdoor unit:

10 m long bus cable for communication between the HRC⁷⁰ and the Pilote Z2 (3 core and already connected to each HRC⁷⁰) (do not place in parallel with power cable).
Flexible pipes (Durite) of 5 m long and rigid insulated pipe to indoor module (diameter according to distance between the two, see table at the bottom of this page).
Filter 1"1/4 for placement on the hydraulic return duct.
Primary pumps are installed in the heat pumps.
2,5 bar pressure relief valve mounted in the heat pumps.

Indoor module Pilote Z2:

Buffertank/hydraulic decoupling bottle 200L with air vent, release valve and safety valve
4 x 2"1/2 flanges and 4 x 1"1/2" sleeves
Flow and return collector to put the heat pumps in cascade
Pressure sensor
Flow meter
Separate box with electronic regulation
USB stick (comes with manual)
Shut-off valve 1 "1/4
Filter tap 1 "1/4
Outdoor sensor for weather dependent control

Installation

The addition of an anti-corrosion agent or a glycol/anti-corrosion mixture is mandatory.

Accessories

Room thermostat RAM 812
Room sensor with display TH HRC70
Domestic hot water sensor DHW S HRC70
HRC70 Communication 20
HRC70 Communication 50
Secondary pump HRC PK CASCADE 6P10
Startup is chargeable (MANDATORY), type XSTARTUPJ, quotation available on request

Applicable boiler

Domestic hot water tank 300 liters, type SANI+ 300 R-AQUA
Domestic hot water tank 500 liters, type SANI+ 500 R-AQUA

Notes

1. Painted welded tank 200 L

2. Hydraulic pressure sensor

3. Automatic purge

4. 6 bar safety valve

5. 2"1/2 valve

6. Thermowell

7. Support foot

8. Drain valve 1"1/4

9. Upper flange

10. Lower flange

11. Insulated finishing cover

Technical data

Technical specifications		HRC 080 Z2 cascade	HRC 120 Z2 cascade	HRC 160 Z2 cascade
Number of outdoor units		2 x HRC70 40	3 x HRC70 40	2 x HRC70 80
Maximum water temperature	°C	70	70	70
Maximum heating capacity	kW	82	123	166
Rated heating capacity +7°C/+35°C	kW	66	99.2	152
COP +7°C/+35°C		4,2	4,2	4,2
Rated heating capacity +7°C/+45°C	kW	62	93	149
Rated heating capacity +7°C/+55°C	kW	61	91.5	146
Rated heating capacity -7°C/+35°C	kW	50	75	108
Rated heating capacity -7°C/+45°C	kW	48	72	106
Rated heating capacity -7°C/+65°C	kW	44	66	102
Energy class 35C°/55C°		A+	A+	A++
Annual energy consumption	kWh/year	32186	48279	56.178
Operating range	°C	-20°C ~ +40°C
Outdoor unit dimensions HxLxW	mm	1545 x 1630 x 1200	1545 x 1630 x 1200	1580 x 2700 x 1200
Total weight outdoor units	kg	2 x 425	3 x 425	2 x 645
Air flow rate per outdoor unit	m³/h	6000 to 12000	6000 to 12000	12000 to 24000
Rated water flow rate per unit	m³/h	4,7	4,7	11
Condensate drain connection	G F	1"
Hydraulic diameter connection	mm	40/49 male
Sound level @ 1m 1 / 2 Compressors	dB(A)	52/61	52/61	39,5 (5m)
Refrigerant (GWP)		R290 (3)
Total amount of refrigerant R290	kg	3,6 (0,702)	3,6 (0,702)	4,5 (0,877)
Power supply per outdoor unit		3 x 400V + N
Fuse per outdoor unit	A	32 (D)	32 (D)	63 (D)
Cable section outdoor per unit	mm²	5G6	5G6	5G16
Maximum absorbed power per unit	A	26,3	26,3	62,2
Maximum starting current per unit	A	54	54	115
Power position OFF (POFF) per unit	kW	0,0077	0,0077	0,008
Power thermostat OFF (PTO) per unit	kW	0,0117	0,0117	0,008
Power standby (PSB) per unit	kW	0,0077	0,0077	0,008
Power carter heating (PCK) per unit	kW	0,0117	0,0117	0,013

Technical data

Indoor module PILOTE		Z2
Minimum power cable width	mm²	3G1,5
Circuit breaker	A	10
Power supply Pilote Z2		230V mono
Multifunctional tank	L	200
Dimensions (LxHxD) Pilote Z2 without the pumps	mm	775 x 1422 x 610
Dimensions (LxHxD) Regulation	mm	455 x 629 x 171
Weight Pilote Z2 without water	kg	81
Weight Pilote Z2 without water	kg	9
Hydraulic connections	inch	Flange 2"1/2 Sleeves 1"1/2
Maximum pressure	bar	6

Dimensions

Minimum required piping diameter between HRC70 40 or 80 and Z2	Depending on the tube used
2 Heatpumps HRC70 40 on 1 pilote Z2	Steel	Copper	PER-tube
If distance between heat pump and indoor module >10 m and <20 m	57,3 mm	44,6 mm	44,6 mm
If distance between heat pump and indoor module >20 m and <35 m	65 mm	50,9 mm	50,9 mm
If distance between heat pump and indoor module >35 m and <50 m	65 mm	50,9 mm	50,9 mm
If distance between heat pump and indoor module >50 m and <75 m	70 mm	55,1 mm	55,1 mm
If distance between heat pump and indoor module >75 m and <100 m	73,9 mm	58,3 mm	58,3 mm
3 Heatpumps HRC70 40 on 1 pilote Z2	Steel	Copper	PER-tube
If distance between heat pump and indoor module >10 m and <20 m	67,2 mm	52,6 mm	52,6 mm
If distance between heat pump and indoor module >20 m and <35 m	76,2 mm	60 mm	60 mm
If distance between heat pump and indoor module >35 m and <50 m	76,2 mm	60 mm	60 mm
If distance between heat pump and indoor module >50 m and <75 m	82,2 mm	64,91 mm	64,91 mm
If distance between heat pump and indoor module >75 m and <100 m	86,7 mm	68,7 mm	68,7 mm
2 Heatpumps HRC70 80 on 1 pilote Z2	Steel	Copper	PER-tube
If distance between heat pump and indoor module >10 m and <20 m	86,4 mm	68 mm	68 mm
If distance between heat pump and indoor module >20 m and <35 m	98,4 mm	77,8 mm	77,8 mm
If distance between heat pump and indoor module >35 m and <50 m	98,4 mm	77,8 mm	77,8 mm
If distance between heat pump and indoor module >50 m and <75 m	106,3 mm	84,5 mm	84,5 mm
If distance between heat pump and indoor module >75 m and <100 m	112,2 mm	89,6 mm	89,6 mm

HELP Copyright Sales conditions Cookie policy fujitsu-airco.be

Informatie aanvragen. Even geduld a.u.b...




	Introduction

A	Products for air diffusion

B	Valves & volume control dampers

C	Air duct systems

D	Air duct components and accessories

E	Fireproof products

F	Insulating products

G	Air filters

I	Fans & ventilation systems

J	Air handling, air conditioning and heatpumps

	J01	Air to Water Heat Pumps

	J02	Air conditioning and heatpumps

	J03	Air Handling Units, chillers & fancoils

	J04	Condensate pumps

	J05	Accessories, tools & maintenance products

	J07	Dehumidifiers

	J08	Steam humidifiers

	J09	Heating and cooling batteries

	J10	Air curtains

	J11	Controllers

	J12	Servomotors


	Einde Voorraad Aanbiedingen

	Producten met Kwantum Kortingen

	Promo Artikelen

	Beëindigde producten
	Producten voor projecten