HPB 200/300 • Heat pump water heater floor model or floor mounting

Boiler heat pump for the production of domestic hot water. The heat pump is very energy efficient and has the A+ energy label. Sound insulation ensures silent operation of the boiler. The tank is made of enamelled steel and has a volume of 200 or 300 liters, which allows the production of domestic hot water. The device is equipped with a micro-channel heat exchanger which are made of aluminum. The main advantage being the absence of contact with water.

• R-AQUA

• Production of domestic hot water for household use

• Smart Grid Ready
• Enamelled water tank of 200 or 300 liters (enamelling process at 860°C)
• The aluminum heat exchanger of the heat pump is located around the water tank instead of in the water tank: this ensures a separation between the refrigerant and the domestic hot water
• Energy label A+ with a COP up to 3,09 according to EN16147
• Low-noise operation of only 38,1 dB (A)
• Production of domestic hot water possible from 38°C to 55°C (75°C with resistance)
• Anti-legionella cycle
• Heating capacity of the heat pump: 1,5 kW
• Electric back-up resistance of 1,5 kW
• Protection through a magnesium anode
  
• Economy, smart or boost function
• Holiday mode
• Attention : The safety group (max. pressure 7 bar) is not included. To be provided by the installer and to be mounted on the cold water supply pipe - To be connected to the drain pipe.

• R290

• Floor mounting

• WiFi module, type HPB(-S) WIFI
• Insulation coupling, type ISC

• Safety group, type PSG

• Siphon for pressure safety group, type SSG

• Expansion vessel for sanitary water, type SEV

• Connection kit for sanitary expansion vessel, type EVC SAN

• Pressure regulator, type PRV

• Insulated duct (2m), type ISDR 200/170
• Insulated bend, type ISDR BD90/45° 200/170
• Connection piece, type ISDR M
• Wall passage, type ISDR BLR 200/170
• Roof passage, type ISDR DDI 200/170
• Suspension bracket, type OBMC 200, for mounting of ducts with outer diameter 200