HPB-S 300A • Heat pump water heaters with extra heat exchanger (solar) 300L

Boiler heat pump for the production of domestic hot water. The heat pump is very energy efficient and has the A+ energy label. Sound insulation ensures silent operation of the boiler. The tank is made of enamelled steel and has a volume 293 liters, which allows the production of domestic hot water. The device is equipped with an aluminum micro-channel heat exchanger. The main advantage is that the exchanger is not in contact with water. The HPB-S heat pump boiler is equipped with an additional coil with a surface of 1m² for the connection of another heat source, for example solar panels.

• R-AQUA

• Production of domestic hot water for household use

• Smart Grid Ready
• Enemelled steel water tank of 293 liters (enamelling process at 860°C)
• LED touch screen controller
• The aluminum heat exchanger of the heat pump is located around the water tank instead of in the water tank, thus ensuring a separation between the refrigerant and the domestic hot water
  
• The S version is equipped with an additional coil for the connection of another heat source, for example solar panels.
  
• Energy label A+ with a COP up to 3,41 according to EN16147
• Low-noise operation of only 35 dB (A)
• Production of domestic hot water possible from 38°C to 55°C (75°C with resistance)
• Anti-legionella cycle
• Heating capacity of the heat pump: 1,5 kW
• Electric back-up resistance of 1,5 kW
• Protection through a magnesium anode
  
• Economy, smart or boost function
• Holiday mode
• Attention : The safety group (max. pressure 7 bar) is not included. To be provided by the installer and to be mounted on the cold water supply pipe - To be connected to the drain pipe.

• R290

• Floor mounting

• WiFi module, type HPB(-S) WIFI
• Safety group, type PSG
• Siphon for pressure safety group, type SSG
• Expansion vessel for sanitary water, type SEV
• Connection kit for sanitary expansion vessel, type EVC SAN
• Pressure regulator, type PRV
• Insulated duct (2m), type ISDR 200/170
• Insulated bend, type ISDR BD90/45° 200/170
• Connection piece, type ISDR M
• Wall passage, type ISDR BLR 200/170
• Roof passage, type ISDR DDI 200/170
• Suspension bracket, type OBMC 200, for mounting of ducts with outer diameter 200 mm