HPB 100/150 • Heat pump water heaters for wall mounting 100L/150L

Boiler heat pump for the production of domestic hot water. The heat pump is very energy efficient and has the A+ energy label. Sound insulation ensures silent operation of the boiler. The tank is made of enamelled steel and has a volume of 100 or 150 liters, which allows the production of domestic hot water. The device is equipped with a micro-channel heat exchanger made of aluminum. The main advantage being the absence of contact with water.

• R-AQUA

• Production of domestic hot water

• Smart Grid Ready
• Enamelled water tank of 100 or 150 liters (enamelling process at 860°C)
• The aluminum heat exchanger of the heat pump is located around the water tank instead of in the water tank: this ensures a separation between the refrigerant and the domestic hot water
• Energy label A+ with a COP up to 2,78 according to EN16147
• Low-noise operation of only 35,5 dB (A)
• Production of domestic hot water possible from 38°C to 55°C (60°C with resistance)
• Anti-legionella cycle
• Heating capacity of the heat pump: 0,9 kW
• Electric back-up resistance of 1,5 kW
• Protection through a magnesium anode
  
• Economy, smart or boost function
• Warning: The safety group (max. pressure 7 bar) is not included. To be provided by the installer and to be mounted on the cold water supply pipe - To be connected to the drain pipe.

• R290

• Wall mounting (mounting bracket included)

• WiFi module, type HPB(-S) WIFI
  

• Insulation coupling, type ISCM

• Safety group, type PSG

• Siphon for pressure safety group, type SSG

• Expansion vessel for sanitary water, type SEV

• Connection kit for sanitary expansion vessel, type EVC SAN

• Pressure regulator, type PRV

• Insulated duct (2m), type ISDR 160/125
• Insulated bend, type ISDR BD90/45° 160/125
• Connection piece, type ISDR M 160/160
• Wall passage, type ISDR BLR 160/125
• Roof passage, type ISDR DDI 160/125
• Suspension bracket, type OBMC 160, for mounting of ducts with outer diameter 160