The hydro module CWP-IU
is a fully equipped indoor unit and is intended for use in combination with a CWP-M
monoblock. This device provides your home with central heating, cooling and domestic hot water. The compact hydro module is equipped with a three-way valve,
expansion vessel, backup resistance and built-in central heating and water
heater regulation. The hydro module is connected to the monoblock outdoor unit
by means of hydraulic pipes.
- Room thermostat, type TS-CLOUD, TS-CLOUD RF (only suitable for heating)
- Buffer tank, type BTE 60, BTE 100
Deaerator, type AAS
Magnetic dirt separator, type ADS
Differential pressure regulator, type DPC
Filling set, type WFS
Expansion vessel for heating, type HEV
Expansion vessel console, type EVC
Protector, type PAB
- Start-up is strongly recommended, type XSTARTUPJ
Water filter, safety group and expansion vessel MUST be provided on site.
Startup
- Start-up by CAIROX BELGIUM strongly recommended
Technical data
|
Max. pressure | bar | 3 | Water supply temperature (min.-max.) | °C | 5 ~ 75 | Expansion vessel* | l | 10 | Pressure sensor** | dB(A) | 35 | Dimensions (LxDxH) | mm | 485x295x665 | Weight | kg | 53 | Hydraulic connections | inch | 1" | Condensate drain diameter | mm | 32 | Power supply | V / Ph / Hz | 230/1/50 | 400/3/50 | Electrical back-up heater capacity | kW | 3 | 3+6 | Max. absorbed power (résistance d'appoint) | A | 14 | 13 | Automatic fuse (slow) | A | 20 | 20 | Power supply cable section | mm² | 3G2,5 | 5G2,5 | Specifications and design may be altered for further improvement without prior notice. | * The size of the expansion vessel should be determined depending on the total water volume of the system. | ** Measured at 1m distance in a semi-anechoic. |
|