PRODUCTEN
EShop-nummer
Wachtwoord
Welcome to CAIROX BELGIUM

CAB • Cleaners

  • Cleaning products
  • Hydraulic systems
  • Cleaning products

The cleaner (C3 Cleaner 570911) dislodges sludge, scale deposits and dirt particles from hydraulic installations, after which the filter or dirt separator collects the dirt so that it can be eliminated. The cleaner can be applied to new and existing heating and cooling systems at high or low temperature. The cleaner is non-aggressive and therefore suitable for all materials used in hydraulic systems. In addition, the cleaner can be used with all types of propylene glycol.

Brand

Caleffi

Application

To remove sludge, scale, dirt particles and deposits from existing installations. For new installations, the cleaner enables commissioning to the required standards.

Specifications

  • Bottle content: 500 ml liquid
  • Colour: light brown
  • Odour: light
  • pH: 7-8
  • Relative density: 1,15
  • Solubility (in water): soluble in hot and cold water

Artikelen

Artikelselectie-assistent
Type
Lengte [mm]
Breedte [mm]
Hoogte [mm]
Max. gewicht [kg]
Verpakking [stuks]
Artikelnummer Type Lengte [mm] Breedte [mm] Hoogte [mm] Max. gewicht [kg] Verpakking [stuks] E-shop
J050105060001 MPR 600 (1 PCE) 600 150 95 500 1 pce
J050105100000 MPR 1000 (1PCE) 1000 150 95 500 1 pce
=> Voorraadproduct regionale filialen behoudens verkoop
=> Verkoopbaar tot einde voorraad; geen nabestelling mogelijk. Eventuele eindereekskorting is reeds verrekend in de catalogusprijs
=> Artikel met kwantumkorting
Montagetoebehoren worden meegeleverd per montageblok: 2 bouten M10x25, 2 moeren M10 & 2 sluitringen M10x20

Notes


Flushing an existing or new installation:

  1. Turn off the circulation pump.

  2. Add the appropriate amount of cleaner to the installation, this can be done through the dirt separator. Overdosage poses no problems.
    Dosage: 500 ml per 150 l of water.

  3. Turn the circulation pump on and let the water circulate during:
    min. 1 hour for high temperature water (T > 50°C)
    min. 4 hours for low temperature water (30°C < T < 40°C)
    up to 1 week for cold water

  4. Turn off the circulation pump.

  5. Drain the water and flush thoroughly, at least twice, until the water runs clear. Dispose of drain water according to applicable regulations. Repeat the above steps for heavily contaminated systems.

  6. Add the appropriate amount of protection additive to the system.
    Dosage: 500 ml per 150 l of water.

  7. Turn the circulation pump on.

The complete instructions can be found in the manual under “Downloads”.

HELPCopyrightSales conditionsCookie policyfujitsu-airco.be

Informatie aanvragen. Even geduld a.u.b...