PRODUCTEN
EShop-nummer
Wachtwoord
Welcome to CAIROX BELGIUM

CAB • Cleaners
  • Cleaning products
  • Hydraulic systems
  • Cleaning products

The cleaner (C3 Cleaner 570911) dislodges sludge, scale deposits and dirt particles from hydraulic installations, after which the filter or dirt separator collects the dirt so that it can be eliminated. The cleaner can be applied to new and existing heating and cooling systems at high or low temperature. The cleaner is non-aggressive and therefore suitable for all materials used in hydraulic systems. In addition, the cleaner can be used with all types of propylene glycol.

Brand

Caleffi

Application

To remove sludge, scale, dirt particles and deposits from existing installations. For new installations, the cleaner enables commissioning to the required standards.

Specifications

  • Bottle content: 500 ml liquid
  • Colour: light brown
  • Odour: light
  • pH: 7-8
  • Relative density: 1,15
  • Solubility (in water): soluble in hot and cold water

Artikelen

Article selection assistant
Diameter D [mm]
Article number Type [mm] Diameter D [mm] E-shop
C010103080000 MDV 80 80
C010103100000 MDV 100 100
C010103125000 MDV 125 125
C010103150000 MDV 150 150
C010103160000 MDV 160 160
C010103180000 MDV 180 180
C010103200000 MDV 200 200
C010103250000 MDV 250 250
C010103280000 MDV 280 280
C010103300000 MDV 300 300
C010103315000 MDV 315 315
C010103355000 MDV 355 355
C010103400000 MDV 400 400
C010103450000 MDV 450 450
C010103500000 MDV 500 500
C010103560000 MDV 560 560
C010103630000 MDV 630 630
C010103710000 MDV 710 710
C010103800000 MDV 800 800
C010103900000 MDV 900 900
C010103A00000 MDV 1000 1000
=> Stock product central warehouse, except sales
=> Stock product local warehouses, except sales
Price per piece

Notes


Flushing an existing or new installation:

  1. Turn off the circulation pump.

  2. Add the appropriate amount of cleaner to the installation, this can be done through the dirt separator. Overdosage poses no problems.
    Dosage: 500 ml per 150 l of water.

  3. Turn the circulation pump on and let the water circulate during:
    min. 1 hour for high temperature water (T > 50°C)
    min. 4 hours for low temperature water (30°C < T < 40°C)
    up to 1 week for cold water

  4. Turn off the circulation pump.

  5. Drain the water and flush thoroughly, at least twice, until the water runs clear. Dispose of drain water according to applicable regulations. Repeat the above steps for heavily contaminated systems.

  6. Add the appropriate amount of protection additive to the system.
    Dosage: 500 ml per 150 l of water.

  7. Turn the circulation pump on.

The complete instructions can be found in the manual under “Downloads”.
HELPCopyrightSales conditionsCookie policyfujitsu-airco.be

Informatie aanvragen. Even geduld a.u.b...