PRODUCTS
EShop-number
Password
Welcome to CAIROX BELGIUM

ADS • Magnetic dirt separators

  • Hydraulic accessories
  • Dirt separators

The magnetic dirt separator (XF 577600) protects the components in hydraulic systems by ensuring that the fluid is free from impurities, thus maximizing heat transfer efficiency. This compact device integrates three distinct separation methods: collision media for large non-magnetic debris, a central magnet for capturing ferrous material and a 160 μm mesh filter for trapping remaining fine impurities.
The magnetic dirt separator is designed for applications such as heat pumps, where critical components like heat exchangers are sensitive to debris and magnetic impurities. The top cap rotates to control an internal brush that cleans the fine mesh filter by dislodging debris and directing it toward the purge valve. Removing the central magnet facilitates the release of ferrous material.

Brand

Caleffi

Installation

When mounting the dirt separator, pay attention to the flow direction indicated by the arrow on the T piece. For optimum protection, the dirt separator should be installed as close as possible to the source or heat pump on the return line.

The complete installation and commissioning instructions can be found in the manual under “Downloads”.

Specifications

  • Connection: G 1" (ISO 228-1) F
  • Maximum operating pressure: 3 bar
  • Liquid temperature range: 0-90°C
  • Mesh filter size ⌀: 0,16 mm
  • Material: technopolymere
  • Adjustable for horizontal and vertical pipes

Artikelen

Article selection assistant
Type
Length [mm]
Width [mm]
Height [mm]
Max. load [kg]
Packing [pieces]
Article number Type Length [mm] Width [mm] Height [mm] Max. load [kg] Packing [pieces] E-shop
J050106060000 MPRH 600 600 200 150 250 1
J050106120000 MPRH 1200 1200 200 150 500 1
=> Stock product central warehouse, except sales
=> Stock product local warehouses, except sales
=> Article with a volume discount
1) MPRH 600 en MPRH 1200: All necessary screws are delivered with the mounting bloc: 2 M10x25 bolts, 2 M10 wrenches & 2 M10x20 washers
SLNB-GT M8: bolts with serrated sliding nuts

Configuration

A: 1"
B: 158mm
C: 110mm
D: 184mm
E: 87mm
HELPCopyrightSales conditionsCookie policyfujitsu-airco.be

Requesting information. Please wait a moment...