PRODUCTS
EShop-number
Password
Welcome to CAIROX BELGIUM

YDS • Y-strainers

  • Hydraulic accessories
  • Filters

The Y-strainer (SMY) contains a stainless steel sieve that filters and collects all material from the liquid.
The strainer is suitable for heating, cooling and drinking water systems.
By installing a Y-strainer, the hydraulic components in the system are protected from clogging or damage caused by impurities in the water.

Brand

Watts

Installation

The Y-strainer can be installed on both horizontal and vertical pipes. Install the strainer in the direction of the arrow and with the plug facing down, so that the effluent will carry the dirt in the strainer and not flow back into the pipe when opening the strainer. When installing the strainer, leave enough room to remove the sieve.

The complete installation and commissioning instructions can be found in the manual under “Downloads”.

Specifications

  • Maximum operating pressure: 20 bar
  • Minimum temperature: -10 °C
  • Maximum temperature: 120 °C
  • Body material: brass
  • Sieve material: stainless steel
  • Filtration capacity: 500µm

Artikelen

Artikelselectie-assistent
Type
Lengte [mm]
Breedte [mm]
Hoogte [mm]
Artikelnummer Type Lengte [mm] Breedte [mm] Hoogte [mm] E-shop
J050105040000 MPRX 400 (SET) 400 130 95
J050105060002 MPRX 600 (SET) 600 130 95
J050105120000 MPRX 1200 (SET) 1200 130 95
=> Voorraadproduct centraal magazijn behoudens verkoop
=> Voorraadproduct regionale filialen behoudens verkoop
=> Artikel met kwantumkorting
Montagetoebehoren worden meegeleverd per montageblok: 2 bouten M10x30, 2 moeren M10 & 2 sluitringen M10

Configuration

Dimensions

ModelL (mm)B (mm)Kvs
YDS 1/2"58403.8
YDS 3/4"70487.2
YDS 1"875611
HELPCopyrightSales conditionsCookie policyfujitsu-airco.be

Requesting information. Please wait a moment...