PRODUCTEN
EShop-nummer
Wachtwoord
Welcome to CAIROX BELGIUM

SBA-A • Swimming pool dehumidifiers

Wall model dehumidifier SBA-A for indoor pools to be installed in the poolroom. The SBA-A increases comfort and prevents mould growth and moisture damage to furniture or the building structure. The units have an epoxy coating to resist chlorine vapours. Optionally, this dehumidifier can be equipped with a heating coil for a more pleasant indoor climate. The dehumidifier does not have a built-in humidity probe. Choose from the accessories listed below for a built-in humidity probe RGDD or a remote humidistat HYGR for mounting in the pool area.

Brand

  • Emicon

Application

  • Dehumidifying indoor swimming pools
  • On request also available as an industrial dehumidifier (HBA-A version) operating up to 5°C instead of up to 20°C.

Capacity

  • 50 to 200 l/24h
  • 500 to 1650 m³/h

Accessoires

  • HYGR - Remote mechanical hygrostat for wall mounting. It comes with a control knob and has a working range from 30% to 100% with an accuracy of 3%. (Not compatible with the RGDD option)
  • HOEL - Electric post-heating battery (Also take the RGDD.05 in this case)
  • HOWA - Hot water battery (on central heating water from the boiler or heat pump) to heat the air in the room after drying (also take the KIVM and RGDD.05 in this case)(not available for HBA version)
  • KIVM - modulating 3-way valve
    In combination with the HOWA hot water battery. The 3-way valve is controlled directly from the regulator of the SBA unit(not available for HBA version).
  • INSE - Serial Interface Card RS485
    This interface card allows the regulator to communicate with other devices via the Modbus protocol.
  • LS00 - Low noise version
  • PCRL - Remote control
    This panel can be mounted up to 50 m (maximum) from the device and displays all control functions. It is connected using a double cable with a section of 0.75 mm².
  • RGDD - Humidity and temperature sensor - Built-in electronic temperature and humidity sensor. (Not compatible with the HYGR option)

Order example

The "SBA (A) 50 1PH RGDD" and "SBA (A) 75 1 PH RGDD" are stock product central warehouse unless sold and have the following options fitted as standard:

  • RGDD Humidity and temperature sensor Built-in

Artikelen

Article selection assistant
Dia [mm]
Color
Q Intake (2,5 m/s in the duct) [m³/h]
Q Outtake (3,5 m/s in the valve) [m³/h]
Article number Type Dia [mm] Color Q Intake (2,5 m/s in the duct) [m³/h] Q Outtake (3,5 m/s in the valve) [m³/h] E-shop
A090101125000 CT125R 125 Red 105 147
A090101150000 CT150R 150 Red 153 214
A090101160000 CT160R 160 Red 153 214
A090101200000 CT200R 200 Red 275 384
A090101250000 CT250R 250 Red 431 604
A090101315000 CT315R 315 Red 689 964
A090101355000 CT355R 355 Red 876 1226
A090101400000 CT400R 400 Red 1114 1560
A090101450000 CT450R 450 Red 1412 1977
A090101500000 CT500R 500 Red 1746 2444
A090101630000 CT630R 630 Red 2779 3891
A090102125000 CT125B 125 Gray 105 147
A090102150000 CT150B 150 Gray 153 214
A090102160000 CT160B 160 Gray 153 214
A090102200000 CT200B 200 Gray 275 384
A090102250000 CT250B 250 Gray 431 604
A090102315000 CT315B 315 Gray 689 964
A090102355000 CT355B 355 Gray 876 1226
A090102400000 CT400B 400 Gray 1114 1560
A090102450000 CT450B 450 Gray 1412 1977
A090102500000 CT500B 500 Gray 1746 2444
A090102630000 CT630B 630 Gray 2779 3891
=> Stock product central warehouse, except sales
=> Stock product local warehouses, except sales
=> Article with a volume discount

Technical data

SBA-A5075100150200
Moisture removal at 30°C - 80%l/24h497395155190
Moisture removal at 30°C - 60%l/24h40.156.677.3113.1143.5
Moisture removal at 27°C - 60%l/24h35.650.768.996.6131.7
Moisture removal at 20°C - 60%l/24h25.835.651.371.596.6
Nominal input power(1)(2)kW0.71.21.61.92.5
Maximum input power(2)kW1.21.822.73.4
Electrical post-heater (option)kW33366
Maximum input current(2)A46.87.812.115.7
Peak currentA1925384564
Hot water coil(3)kW3.57711.511.8
Air flow ratem3/h500800100014001650
Refrigerant (GWP) R410A (2088)
Refrigerant chargeg (CO2eq-T)470 (0.981)600 (1.253)700 (1.462)1200 (2.506)
Sound power(4)dB(A)5457575961
Sound pressure level(5)dB(A)4750505254
Power supplyV/Ph/Hz230/1/50

Performances are calculated with low fan speed and are referred to the following conditions:
  • (1) Temperature 30°C, humidity 80%
  • (2) Without electrric heater
  • (3) Room temperature 30°C, water temperature 80/70°C, compressor OFF
  • (4) Sound power level calculated according to ISO 9614
  • (5) Sound pressure level measured at 1 meter from the unit in free field conditions according to ISO 9614

Dimensions

 A [mm]B [mm]C [mm][kg]
SBA 50 A75076026050
SBA 75 A750106026064
SBA 100 A750706026068
SBA 150 A836131031099
SBA 200 A8361310310102

Accessories

SBA50 A75 A100 A150 A200 A
Low noise version LS00Standard
Hot water coil (LPHW)HOWA.49HOWA.75HOWA.76
Electrical reheating 3 kW (230/1/50)HOEL.29-
Electrical reheating 3 kW (230/1/50)-HOEL.30-
Electrical reheating 6 kW (230/1/50)-HOEL.62
Built-in electronic temperature/humidity sensorRGDD.05
Mechanical humidistatHYGR.20
Remote Control PanelPCRL.10
Serial card RS485-MODBUSINSE.10
Built-in 3-way valveKIVM.75KIVM.76
Mounting feetZOCC.15
HELPCopyrightSales conditionsCookie policyfujitsu-airco.be

Informatie aanvragen. Even geduld a.u.b...