SBA-P • Swimming pool dehumidifiers

Indoor pool area
Installation through the wall
50 - 200 l / 24h
Emicon

Accessories

HOWA & KIVM • Hot water coil (HOWA) + 3 way modulating valve (KIVM) HOEL • Electric reheating battery SBA-A, SBA-P, SDA, SHA RGDD • Built-in Electronic temperature and humidity probe HYGR.20 • Remote mechanical hydgrostat PCRL.10 • Remote control panel INSE.10 • RS485 Serial interface for Hidros dehumidifiers KGBH/PMBH • Pulsion/Suction Grille and Plenums 90° for SBA-P

Datasheet

Dehumidifier for wallmounting for indoor pools mounted through the wall. The SBA-P increases comfort and prevents mould growth and moisture damage to furniture or the building structure. The units have an epoxy coating to resist chlorine vapours. Optionally, this dehumidifier can be equipped with a heating coil for a more pleasant indoor climate. The dehumidifier does not have a built-in humidity probe. Choose from the accessories listed below for a built-in humidity probe RGDD or a remote humidistat HYGR for mounting in the pool area.

Brand

Emicon

Application

Dehumidifying indoor swimming pools
To be mounted in the adjacent technical room
On request also available as an industrial dehumidifier (HBA-P-version) operating up to 5°C instead of up to 20°C.

Capacity

50 to 200 l/24h
500 to 1650 m³/h

Accessoires

HYGR - Remote mechanical hygrostat for wall mounting. It comes with a control knob and has a working range from 30% to 100% with an accuracy of 3%.(Not compatible with the RGDD option)
HOEL - Electric post-heating battery (Also take the RGDD.05 in this case)
HOWA - Hot water battery (on central heating water from the boiler or heat pump) to heat the air in the room after drying (also take the KIVM and RGDD.05 in this case)
KIVM - modulating 3-way valve
In combination with the HOWA hot water battery. The 3-way valve is controlled directly from the regulator of the SBA unit.
INSE - Serial Interface Card RS485
This interface card allows the regulator to communicate with other devices via the Modbus protocol.
LS00 - Low noise version
PCRL - Remote control
This panel can be mounted up to 50 m (maximum) from the device and displays all control functions. It is connected using a double cable with a section of 0.75 mm².
RGDD - Humidity and temperature sensor - Built-in electronic temperature and humidity sensor.(Not compatible with the HYGR option)
KGBH - Grille set - Two air grilles with a double row of adjustable brushed aluminium fins. Suitable for wall mounting with a mounting frame.
PMBH - Exhaust and return plenum 90° To divert the exhaust/return air from the technical room to the pool and vice versa. The bends are coated with polyurethane powder.

Order example

The "SBA (P) 50 1PH RGDD" and "SBA (A) 75 1 PH RGDD" are stock product central warehouse unless sold and have the following options fitted as standard:

KGBH Grille set Air grilles with a double row of adjustable brushed aluminium fins
PMBH Exhaust and return plenum 90°
RGDD Humidity and temperature sensor Built-in

Technical data

SBA-P		50	75	100	150	200
Moisture removal at 30°C - 80%	l/24h	49	73	95	155	190
Moisture removal at 30°C - 60%	l/24h	40.1	56.6	77.3	113.1	143.5
Moisture removal at 27°C - 60%	l/24h	35.6	50.7	68.9	96.6	131.7
Moisture removal at 20°C - 60%	l/24h	25.8	35.6	51.3	71.5	96.6
Nominal input power⁽¹⁾⁽²⁾	kW	0.7	1.2	1.6	1.9	2.5
Maximum input power⁽²⁾	kW	1.2	1.8	2	2.7	3.4
Electrical post-heater (option)	kW	3	3	3	6	6
Maximum input current⁽²⁾	A	4	6.8	7.8	12.1	15.7
Peak current	A	19	25	38	45	64
Hot water coil⁽³⁾	kW	3.5	7	7	11.5	11.8
Air flow rate	m³/h	500	800	1000	1400	1650
Refrigerant (GWP)		R410A (2088)
Refrigerant charge	g (CO2eq-T)	470 (0.981)	600 (1.253)	700 (1.462)	1200 (2.506)
Sound power⁽⁴⁾	dB(A)	54	57	57	59	61
Sound pressure level⁽⁵⁾	dB(A)	47	50	50	52	54
Power supply	V/Ph/Hz	230/1/50

Performances are calculated with low fan speed and are referred to the following conditions:

(1) Temperature 30°C, humidity 80%
(2) Without electrric heater
(3) Room temperature 30°C, water temperature 80/70°C, compressor OFF
(4) Sound power level calculated according to ISO 9614
(5) Sound pressure level measured at 1 meter from the unit in free field conditions according to ISO 9614

Dimensions

	A [mm]	B [mm]	C [mm]	[kg]
	A [mm]	B [mm]	C [mm]	[kg]
SBA 50 P	680	250	706	41
SBA 75 P	680	250	1006	51
SBA 100 P	680	250	1006	61
SBA 150 P	770	300	1255	82
SBA 200 P	770	300	1255	87

Accessories

SBA	50 P	75 P	100 P	150 P	200 P
Low noise version LS00	Standard
Hot water coil (LPHW)	HOWA.49	HOWA.75		HOWA.76
Electrical reheating 3 kW (230/1/50)	HOEL.29	-	-	-	-
Electrical reheating 3 kW (230/1/50)	-	HOEL.30		-	-
Electrical reheating 6 kW (230/1/50)	-	-	-	HOEL.62
Built-in electronic temperature/humidity sensor	RGDD.05
Mechanical humidistat	HYGR.20
Remote Control Panel	PCRL.10
Serial card RS485-MODBUS	INSE.10
Built-in 3-way valve	KIVM.75			KIVM.76
Exhaust and return plenums in bend 90° 2 pieces	PMBH.09	PMBH.10		PMBH.20
Pulsation and extraction grilles with subframe	KGBH.50	KGBH.75		KGBH.15
Mounting feet	N/A

HELP Copyright Sales conditions Cookie policy fujitsu-airco.be

Requesting information. Please wait a moment...




	Introduction

A	Products for air diffusion

B	Valves & volume control dampers

C	Air duct systems

D	Air duct components and accessories

E	Fireproof products

F	Insulating products

G	Air filters

I	Fans & ventilation systems

J	Air handling, air conditioning and heatpumps

	J01	Air to Water Heat Pumps

	J02	Air conditioning and heatpumps

	J03	Air Handling Units, chillers & fancoils

	J04	Condensate pumps

	J05	Accessories, tools & maintenance products

	J07	Dehumidifiers

	J08	Steam humidifiers

	J09	Heating and cooling batteries

	J10	Air curtains

	J11	Controllers

	J12	Servomotors


	End of Stock Offers

	Products with Quantum Discounts

	Promo Items