This site uses cookies and related technologies, as described in our privacy policy, for purposes that may include site operation, analytics, enhanced user experience, or advertising. You may choose to consent to our use of these technologies, or manage your own preferences.
Dehumidifier for wallmounting for indoor pools mounted through the wall. The SBA-P increases comfort and prevents mould growth and moisture damage to furniture or the building structure. The units have an epoxy coating to resist chlorine vapours. Optionally, this dehumidifier can be equipped with a heating coil for a more pleasant indoor climate. The dehumidifier does not have a built-in humidity probe. Choose from the accessories listed below for a built-in humidity probe RGDD or a remote humidistat HYGR for mounting in the pool area.
Brand
Emicon
Application
Dehumidifying indoor swimming pools
To be mounted in the adjacent technical room
On request also available as an industrial dehumidifier (HBA-P-version)
operating up to 5°C instead of up to 20°C.
Capacity
50 to 200 l/24h
500 to 1650 m³/h
Accessoires
HYGR - Remote mechanical hygrostat for wall mounting. It comes with a control
knob and has a working range from 30% to 100% with an accuracy of 3%.(Not compatible with the RGDD option)
HOEL - Electric post-heating battery (Also take the RGDD.05 in this
case)
HOWA - Hot water battery (on central heating water from the boiler or
heat pump) to heat the air in the room after drying (also take the KIVM and
RGDD.05 in this case)
KIVM - modulating 3-way valve In combination with the HOWA hot water battery. The 3-way valve is
controlled directly from the regulator of the SBA unit.
INSE - Serial Interface Card RS485 This interface card allows the regulator to communicate with other
devices via the Modbus protocol.
LS00 - Low noise version
PCRL - Remote control This panel can be mounted up to 50 m (maximum) from the device and displays all control functions. It is connected using a double cable with a
section of 0.75 mm².
RGDD - Humidity and temperature sensor - Built-in electronic temperature
and humidity sensor.(Not compatible with the HYGR option)
KGBH - Grille set - Two air grilles with a double row of
adjustable brushed aluminium fins. Suitable for wall mounting with a mounting
frame.
PMBH - Exhaust and return plenum 90° To divert the
exhaust/return air from the technical room to the pool and vice versa. The
bends are coated with polyurethane powder.
Order example
The "SBA (P) 50 1PH RGDD" and "SBA (A) 75 1 PH RGDD"
are stock product central warehouse unless sold and have the following options
fitted as standard:
KGBH Grille set Air grilles with a double row of adjustable brushed aluminium fins
PMBH Exhaust and return plenum 90°
RGDD Humidity and temperature
sensor Built-in
Technical data
SBA-P
50
75
100
150
200
Moisture removal at 30°C - 80%
l/24h
49
73
95
155
190
Moisture removal at 30°C - 60%
l/24h
40.1
56.6
77.3
113.1
143.5
Moisture removal at 27°C - 60%
l/24h
35.6
50.7
68.9
96.6
131.7
Moisture removal at 20°C - 60%
l/24h
25.8
35.6
51.3
71.5
96.6
Nominal input power(1)(2)
kW
0.7
1.2
1.6
1.9
2.5
Maximum input power(2)
kW
1.2
1.8
2
2.7
3.4
Electrical post-heater (option)
kW
3
3
3
6
6
Maximum input current(2)
A
4
6.8
7.8
12.1
15.7
Peak current
A
19
25
38
45
64
Hot water coil(3)
kW
3.5
7
7
11.5
11.8
Air flow rate
m3/h
500
800
1000
1400
1650
Refrigerant (GWP)
R410A (2088)
Refrigerant charge
g (CO2eq-T)
470 (0.981)
600 (1.253)
700 (1.462)
1200 (2.506)
Sound power(4)
dB(A)
54
57
57
59
61
Sound pressure level(5)
dB(A)
47
50
50
52
54
Power supply
V/Ph/Hz
230/1/50
Performances are calculated with low fan speed and are referred to the following conditions:
(1) Temperature 30°C, humidity 80%
(2) Without electrric heater
(3) Room temperature 30°C, water temperature 80/70°C, compressor OFF
(4) Sound power level calculated according to ISO 9614
(5) Sound pressure level measured at 1 meter from the unit in free field conditions according to ISO 9614