CR60+BFLT24 • Motorized circular fire dampers EI60S

Circular fire dampers with a fire resistance of 60 minutes. When the temperature in the damper rises above 72 °C the thermo-electrical link will get triggered and the damper will close. When closed, the expanding material around the fireblade will swell and assure a fire and air-tight seal against hot air and smoke. The tunnel is made out of galvanized steel. The CR60 + BFLT24 fire dampers have a automatic operating mechanism with actuator, with indication of the blade position. An end and begin of range switch is included within the actuator.

• Fire compartimentation
• To close and seal off ventilation ducts in case of fire
• For air temperatures of -10°C up to temperature of the thermo-electric fuse
• For air with RV 0-96%
• Range of Ø100 up to Ø315 mm
• To be mounted horizontally or vertically

• Galvanized steel

• Galvanized steel tunnel
• Fibersilicate fireproof blade
• Intumescent strip
• Belimo BFLT24 Actuator with thermo-electrical fuse
  
  
• 1. Refractory casing (made out of galvanised steel)
• 2. Damper blade
• 3. Operating mechanism
• 4. Rubber sealing ring
• 5. Intumescent strip
• 6. Mounting plate thermo-electric fuse
• 7. Positioning plate
• 8. Sealing ring damper blade
• 9. Product identification

• To be inserted in fire resistant walls or floors and to be fixed according to the mounting instruction delivered with the valves.
• To be connected with round air ducts
• To be electrically wired to the fire detection system or building system

• Classified EI90(v_e,h_o i<->o)S at 300Pa according EN 13501-3 in ridid wall and rigid floor.
• Classified EI60(v_e i<->o)S at 500Pa according EN 13501-3 in flexible wall.
• Certified with test report Efectis 07-A-057 / EFR-19-005411 or WFRG 16126
• Airtight EN 1751 class C
• CE marked

• Fire resistant plaster, type BP

• For bigger sizes see CR2 + BFLT/BFNT 24

• The fire dampers shall be of the round type with a fire resistance of 60 minutes, certified according to EN13501-3 . They will consist of a galvanized steel tunnel and fireproof fiber silicate valve. The control mechanism will be automatically operated by means of an actuator and shall have a blade position indicator and thermo-electrical link of 72 °C
• type CR60 + BFLT 24

• CR60 + BFLT24, 160

Explanation

CR60 = Round fire damper with fire resistance of 60 minutes

BFLT24 = Actuator 24V with thermo-electrical fuse

160 = Connection diameter