DVS-B+K • Fire resistant air exhaust valves EI60S

White fire resistant ventilation exhaust valves with thermal fuse of 70°C and fire resistance class EI60(v_eo->i)S

• For ventilation purposes and fire compartimentation in walls with fire resistance of 60 minutes

• Steel

• White, RAL 9010

• The valve should be mounted in a brick wall or partition gypsum plaster, according to the following methodology:
• Make a reservation DN + 40 mm in the wall crossing. Ø particular case of a partition gypsum: spare a square booking dimension (DN 70) x (DN 70) therein a trimmer with a headband Promatect'H thickness 15mm.
• Fix the pipe in DN standardized circular, to the mounting flange.
• Position and the wedge together in the center of the book so that the folded edge of the flange comes into bare outer face of the receiving valve.
• Grouting periphery coated with gypsum mixed with sand.
• Adjusting the opening of the movable part of the valve (see graphs)
• Install the valve set in the standby position, in its collar by rotating 1/4 turn: to build on the outer edge of the body: do not put stress on the central core!

• CE Certified under the name BCF-2-EI60S
• CE certified 1812-CPD-1039
• Conforme according EN15650-2010
• Classification EI60(v_eo->i)S
• Service pressure 300Pa
• Fuse tested according ISO 10294-4

• Mountingframe (included)
• End of range switch, type FDC DVS-B+K

• The ventilation valves will be fire resistant EI60(v_eo->i)S with thermal fuse of 70° and equipped with mountingframe.
• Finished white, RAL 9010
• type DVS-B+K

• DVS-B + K, 125

Explanation

DVS-B+K = Type of fire resistant valve

125 = Connection diameter