Silent decentralized ventilation unit with heat recovery, high efficiency and low consumption for rooms with a flow rate of 10 to 72 m³/h.
Eurovent certified hygienic devices are also available on request.
Brand
Brink
Application
Decentralized ventilation with heat recovery for smaller spaces
Specifications
Installation in the outer wall, without ductwork
Can be used with wall thicknesses from 270 mm to 600 mm
Easy mounting, hole size dia. 280mm
Flow rates can be set per position between 10 and 72 m³/h
Composition
Counterflow heat exchanger with "straws" made of plastic and developed by Brink with high efficiency
Housing of heat exchanger in EPP
100% bypass with seasonal detection
Built-in proportional frost protection
Energy-efficient stepless EC motor for 2 fans (from 0.2W/m³/h)
constant flow motor
4 adjustable positions
Filter class G4 - ISO 16890 Coarse ≥ 60% (air exhaust) and F7 - ISO 16890 ePM1 ≥ 50% (air intake)
IPX4 on the outside, IP20 on the inside
Filter indication (LED) on the device
Standard ModBus connection with Plus version
Accessories
Insulated outdoor unit with stainless steel or white (RAL9010) finish, type AIR70 WD, necessary for installation
Filter set with F7 filter for the air intake and 2 x G4 filters for the air exhaust, type FS AIR70 G4 - ISO 16890 Coarse ≥ 60% / F7 - ISO 16890 ePM1 ≥ 50%
Only for PLUS version:
On/off switch, type AIR70 SWITCH for on/off switching
External 2 or 4 position switch, type CVREN2 or CVREN4 and RJ12
Internal CO2 sensor, type AIR70 SEN CO2
Internal RH sensor, type AIR70 SEN RHT
Brink Home, WLAN interface, type AIR70 HOME
Order example
AIR70 (PLUS) - Always in combination with:
AIR70 WD-SW XXX - YYY= Insulated outdoor finishing kit to be chosen according to the wall thickness, in stainless steel or white (RAL9010). No finishing kit is required for wall thicknesses of 500 to 550mm.
XXX – YYY = For wall thicknesses from XXX mm to YYY mm