CFMA • Mounting frame

Modular support system made of galvanized steel to support large condensor units, VRF outdoor units, chillers and air handling units.

• Suitable to support VRF outdoor units, chillers and air handling units
• Secure construction for heavy loads
• When more smaller condensor units are mounted back to back on the support, it is advised to verify the minimum distance within the installation manual of the units

• Available with 4,6 or 8 feet depending on the configuration.

• CFMA 1-B 1200: 4 feet, 2 feet support rails of 1000 mm, 2 support rails of 1200 mm
  
• CFMA 2-B 1200: 6 feet, 2 feet support rails of 2000 mm, 4 support rails of 1200 mm
  
• CFMA 3-B 1200: 8 feet, 2 feet support rails of 3000 mm, 6 support rails of 1200mm
• CFMA 1-B 1500: 4 feet, 2 feet support rails of 1000 mm, 2 support rails of 1500 mm
  
• CFMA 2-B 1500: 6 feet, 2 feet support rails of 2000 mm, 4 support rails of 1500 mm
  
• CFMA 3-B 1500: 8 feet, 2 feet support rails of 3000 mm, 6 support rails of 1500mm

• Height-adjustable feet of 300 x 300 mm, made of fibreglass-reinforced plastic.
  Height adjustment between 228 and 353 mm by M24 galvanized steel bolts and threaded rod.

• Antivibration rubber mat of size 300 X 300 mm fixed under the feet to prevent damage of the roof or floor surface and to give vibration attenuation.

• Galvanized steel rails of 41 X 41 x 2.5mm with plastic protection caps on the extremities, to prevent injury.

• Kit with all bolts, brackets and nuts included, except for the fixation of the unit.
  

• CFMA 1-B 1200: max. support weight up to 500 kg

• CFMA 2-B 1200: max. support weight up to 1000 kg

• CFMA 3-B 1200: max. support weight up to 1500 kg

• CFMA 1-B 1500: max. support weight up to 400 kg

• CFMA 2-B 1500: max. support weight up to 800 kg

• CFMA 3-B 1500: max. support weight up to 1200 kg

• CFMA 1-B 1200