PRODUCTS
EShop-number
Password
Welcome to CAIROX BELGIUM
SDA • Swimming pool dehumidifiers
- Swimming pool dehumidifier
- Vertical ductmodel
- 50 - 200 l / 24h
- Emicon
Accessories
RGDD • Built-in Electronic temperature and humidity probe HYGR.20 • Remote mechanical hydgrostat HOWA & KIVM • Hot water coil (HOWA) + 3 way modulating valve (KIVM) PCRL.10 • Remote control panel HOEL • Electric reheating battery SBA-A, SBA-P, SDA, SHA RP01 • Heatrecovery to poolwater dehumidifiers SDA, SHAVertical ductable dehumidifier
for indoor swimming pools. The SDA increases comfort and prevents mould growth
and moisture damage to furniture or the building structure. The units have an
epoxy coating to resist chlorine vapours. Optionally, this dehumidifier can be
equipped with a heating coil for a more pleasant indoor climate. The dehumidifier does not have a built-in humidity probe. Choose from the accessories listed below for a built-in humidity probe RGDD or a remote humidistat HYGR for installation in the swimming pool area.
Brand
- Emicon
Application
- Dehumidification of indoor swimming pools
- On request also available as an industrial dehumidifier (HDA version) operating up to 5°C instead of up to 20°C.
Capacity
- 75 to 200 l/24h
- 800 to 1800 m³/h
Accessoires
- CANA – Flange for connection of an exhaust duct. Preformed rectangular flange for easy connection of an exhaust duct mounted on the exhaust side of the fan. (standard)
- HYGR – Remote mechanical hygrostat for wall mounting. It comes with a control knob and a working range from 30% to 100% with an accuracy of 3%.(Not compatible with the RGDD option)
- HOEL -Electric post-heating battery (Also take the RGDD.05 in this case).
- HOWA -Hot water battery (on central heating water from the boiler or heat pump) to heat the air in the room after drying (also take the KIVM and RGDD.05 in this case)(not available for HDA version).
- INSE - RS485 serial interface card. This interface card allows the controller to communicate with other devices using the Modbus protocol.
- KIVM - 3 way modulating valve kit. It is used to control the flow of water in the battery. The 3-way valve is controlled directly from the microprocessor in this unit(not available for HDA version).
- LS00 - Low noise version (standard).
- PCRL - Remote control. This panel can be mounted up to 50 m (maximum) from the device and displays all control functions. It is connected using a double cable with a section of 0.75 mm².
- RGDD - Humidity and temperature sensor. Built-in electronic temperature and humidity sensor.(Not compatible with the HYGR option)
- RP01 - Partial heat recovery. The exchanger is designed to recover approximately 20% of the thermal capacity generated by the unit into the pool water. (water condenser)(not available for HDA version)
- V1CE - EC-fan 300 Pa
Order example
The "SDA 200 1PH LPHW" is a stock product central warehouse unless sold and has the following options fitted as standard:
- RGDD Humidity and temperature sensor Built-in
- HOWA Hot water battery
- KIVM 3 way modulating valve kit (Build-in)
Requesting information. Please wait a moment...
